Lithofin KF PROTECTIVE IMPREGNATOR is a water based nearly odourless impregnator consisting of a combination of high quality water and oil resistant components.
This special impregnator penetrates into the micro pores of ceramic surfaces and effectively protects tiles and grout lines against staining by inhibiting the penetration of water, oil, grease and dirt. Lithofin KF PROTECTIVE IMPREGNATOR does not affect the appearance of the surface while making it less sensitive and easier to maintain.
For all floors susceptible to staining such as in kitchens, work shops, etc. For protecting all absorbent ceramic tiles in order to facilitate maintenance. Ideally suited for treating polished porcelain tiles. Suitable for indoor and outdoor use.
Directions for use:
The surface to be treated must be completely clean and dry. For best results, treat the surface in sections of approx. 15m² at a time. Shake well before use. Apply undiluted with a clean cloth or a lambs wool applicator and ensure even distribution by wiping over the surface several times. After 10 to 20 minutes, completely remove any surface residues with a squeegee and then with a dry cloth. Check surface for any residues, since these cannot be removed once fully cured. On large surfaces can be applied with a sprayer and then immediately distributed evenly with a sponge. Product residues can be removed with a polishing machine and an absorbent pad.
Floors can be walked on after approx. 2 hours, fully dried out after 24 to 48 hours.
Up to 50m² per litre, depending on the absorbency of the surface.