Genesis 10mm PVC Movement Joint – 2.5m Length
The 10mm PVC movement joint is made using a lightweight and robust PVC material. It has been designed to protect the edge of your chosen floor covering – whether that’s porcelain, ceramic, or natural stone – from light foot traffic.
Movement joints should be installed at strategic points which will absorb movement. By keeping the stress to a minimum, it will prevent tiles and grout from cracking. In some cases, excessive movement can even cause the tiles to come loose from the substrate.
This 10mm PVC movement joint can also be used around the perimeter of the room. Simply remove one of the flanges to use as a perimeter expansion joint, giving you a 10mm cushion between the wall and floor.
The dark grey surface of this movement joint will blend it well with the grout used across the floor. Any chemicals or detergents the PVC may have contact with during tiling will not have an effect on the material.
There are a number of spec sheets that can be downloaded from the manufacturer. This product is also available in a 12mm variation.