Warmup Dual Overlay System
The Warmup Dual Overlay System is recommended for use with Warmup’s Foil Heater and Insulated Underlay, allowing for a complete electric underfloor heating solution. Additionally, the two layers of the Dual Overlay system sit above the foil heater, and acts as a strong and stable subfloor, protecting the floor heater from heavy objects such as wardrobes or beds. In Fact, this whole system is free-floating and easy to install!
The Warmup Dual Overlay System is composed of two separate top and base boards. Because of this, they are laid in a way to stagger and overlap the joints creating a strong subfloor. Also, since the Dual Overlay system is not fixed to the floor below, it offers a quick and clean installation without the need for screed! Once these boards are bonded together, they have a thin final depth of only 7mm!
Please note some floor manufactures only allow the use of underfloor heating systems when they are embedded within a screed/levelling compound. Furthermore, it is important that you contact the tile manufacturer to check that the Warmup Dual Overlay System is suitable!
- Base Board Thickness – 3mm
- Top Board Thickness – 4mm
- MDF, coated with an interactive adhesive
- Size – 1200mm x 600mm