10mm Bath Stone Edging Trim (2.5m)
The 10 mm bath stone edging trim will add the perfect finish to your tiling project. It’s important to have a good quality tile trim to help hide any exposed edges or corners. It will also keep your tile project looking
Made using a long-lasting aluminium, the light colour will lend itself well to many different tile styles. Also, the powder-coated finish adds plenty of character.
This tile trim can be used to protect corners and avoid the dreaded 45-degree cut. Available in lengths of 2.5 meters and in 10 mm and 12 mm sizes.
All our Trims are delivered in secure tubes, so you can be sure they will reach you in perfect condition.
Installation Guide
- Select your trim according to tile thickness.
- trowel tile adhesive over the area that forms the perimeter of the tiled covering.
- Press the perforated anchoring leg of the trim into the tile adhesive and align, mechanical fix if required.
- trowel additional adhesive over the perforated anchoring leg to ensure full coverage.
- Solidly embed the tiles so that the tiled surface is flush with the top of the profile. The profile should not be higher than the tiled surface, but rather up to approximately 1 mm lower.
- Fill the joint completely with grout.
You read more about Genesis tile trim here.