Lithofin MN STAIN STOP ECO provides the ultimate protection against water and oil stains and facilitates every-day maintenance.
Lithofin MN SATIN STOP ECO penetrates into absorbent natural stone surfaces and coats the capillaries with an extremely thin and invisible film of polymers. The treatment prevents the immediate penetration of water based dirt as well as oil and grease, and it provides an effective protection against staining. This protective impregnator does not alter a stone’s sensitivity to acids.
To protect absorbent natural stone against staining and to render surfaces water and oil repellent. Treatment is recommended for all stone surfaces, such as: floors in kitchen, dining and living areas. The surfaces can be polished, honed, and also rough. Can be used as initial protection before grouting and as a pre-treatment. Suitable for indoor and outdoor use.
Directions for Use:
Check the suitability and effect with a test in an inconspicuous area or on a spare tile. The surface must be absorbent, completely dry, clean and free of stains. Shake bottle before use. Apply generously and evenly using a lambs wool applicator, roller, lint free cloth or sponge. Ensure even distribution by wiping over several times. Finally, make a second application after approx. two hours. Ensure that all surface residues are removed after 15 mins by towelling them off. Do not allow residues to dry on the surface. Additionally, on highly absorbent surfaces, apply product several times. Do not wait for surface to dry in between these applications. Check the surface for an even finish after the last application.
Coverage:
- honed limestone: 4-8m² per litre
- polished natural stone: up to 20m².