Lithofin KF GROUT PROTECTOR is a ready to use solvent free special impregnator.
Due to its low viscosity, Lithofin KF GROUT PROTECTOR penetrates well into porous surfaces. Once dry, the remaining active ingredients show a good water and an excellent oil repellent effect. Oil and other substances remain on the surface where they can easily be removed before they cause stains. Removing greasy kitchen dirt becomes easier. The appearance on the surface is not altered.
Directions for Use:
The surface to be treated must be absorbent, clean and free of grease. Use Lithofin KF Grout Cleaner to clean grout lines. Evenly and generously apply Lithofin KF Grout Protector undiluted to the dry surface with a brush or roller. In case of highly absorbent cement grouting, repeat the application several times. After approx. 20 minutes, completely remove all product residues with a cloth. Do not allow the product to dry on the surface.
Drying Time: Approx. 2 hours. The impregnator will be fully effective after 48 hours, protect the surface against water, oil, etc. during this time.
Coverage: When treating grout joints: approx. 10m² per 500ml.