12mm Edging Trim Bright Brass (2.5m)
This 12mm edging trim in an eye-catching brass is designed to protect corners, saving you from doing the fragile 45˚ cut. It’s also important to have a good quality tile trim to help hide any exposed edges.
The defined square edge makes it useful for coverings such as square cut porcelain, marble, and stone. So, whether you’re using it on a wall or floor it will keep your project looking neat and tidy.
Made using a long-lasting aluminium, the bright brass coating will lend itself well to many different tile styles.
All our trims are delivered in secure tubes, so you can be sure they will reach you in perfect condition. There is also a protective film to protect the face during installation.
Available in lengths of 2.5 meters and in 12mm sizes.
Benefits at a glance
- Made using high-quality aluminium
- Eye-catching brushed brass finish
- Protective film
Installation Guide
- Select your trim according to tile thickness.
- Trowel tile adhesive over the area that forms the perimeter of the tiled covering.
- Press the perforated anchoring leg of the trim into the tile adhesive and align, mechanical fix if required.
- Trowel additional adhesive over the perforated anchoring leg to ensure full coverage.
- Solidly embed the tiles so that the tiled surface is flush with the top of the profile. The profile should not be higher than the tiled surface, but rather up to approximately 1 mm lower.
- Fill the joints completely with grout.
You read more about Genesis tile trim here.
